SPECIFICATION

• Input Voltage  
  • 6V to 20Vdc converted to 5V, 3A via step-down DC/DC converter to power the Raspberry Pi and SATA device
• Audio & Video
  • Allows you to extract audio signals from HDMI of your Raspberry Pi
  • Converts HDMI audio to digital optical or Coaxial or stereo RCA analog
  • The SPDIF optical or coaxial audio output supports all audio formats up to 5.1CH Dolby Digital 5.1CH / AC3 &     DTS 5.1CH audio
  • Extracts digital 2CH PCM stereo audio signal from the HDMI input and convert it to 2CH analog stereo output  through its RCA style L/R analog output or earphone jack
  • Provides the Best Flexibility through Three NEW Audio EDID Settings: Pass, 2CH and 5.1CH
  • Maintains surround format when converting to digital optical audio  
  • Supports high definition input up to 1080p@ (24/60) Hz, output resolution follows input
  • Supports HDMI signal amplification and equalization output for repeater function
  • HDMI output supports all audio formats including more advanced Dolby Digital Plus, PCM5.1CH and beyond
• SATA
  • Allows you to connect SATA devices to your Raspberry Pi 
• Wireless
  • Built in IR sensor (38KHz)
• Misc  
  • Power output socket  
  • Directly connected on top of the Raspberry Pi using the board GPIO header pins 
  • Solderless and no wires required 
  • Extra 40-pin header of the R-Pi in order to support existing expansion boards 
  • Suitable for Raspberry Pi Model B+, Raspberry pi 2 Model B and Raspberry Pi 3 Model B NEW!
• Dimensions  
  • 85 x 56mm (Same size as Raspberry Pi)